⎝⎛星力捕鱼⎞⎠

江苏鑫都电热设备有限公司

categories of ⎝⎛星力捕鱼⎞⎠

Product Categories

contact us

Jiangsu Xindu Electric Heating Equipment Co., Ltd.

Contact: Li Qian Telephone: 0515-88616366
Mobile phone: 17712730739
Q Q: 3054453969
Email: jsxddr@163.com
Postcode: 224022
Address: No. 1 Industrial Park, Dazonghu Town, Yandu District, Yancheng City


News Center

Your current location : ⎝⎛星力捕鱼⎞⎠ >> News
  • Do you know the operation steps of the horizontal vacuum cleaning furnace?

    Do you know the operation steps of the horizontal vacuum cleaning furnace? In the first step, put the workpiece to be cleaned into the hanging basket, lift it into the furnace, close the furnace cover and press it tightly. In the second step, open the main water valve, adjust the pressure of the water pressure controller to 0.1Mpa, and adjust the vacuum water spray. The water flow rate of the shower scrubber is between 60 and 100 L / h. The third step is to turn on the main power, turn on the meter switch, and delay on.
    Release time: 2020-01-17 Clicks: 12

  • Advantages and characteristics of electric heating oil furnace

    Advantages: 1. The high-quality heat source heat transfer oil heating system can output hot oil up to 350 ° C for hot users under normal pressure liquid phase; the heat transfer oil heating systems use Fuji temperature control instruments from Japan, and PID self-tuning intelligent temperature control Technology, the control precision can reach the temperature of about ± 1 ℃, and the temperature range can be accurately controlled;
    Release time: 2020-01-04 Clicks: 12

  • Introduction of safety precautions for thermal oil furnace

    Heat transfer oil heater is our common equipment, so what are the safety measures for heat transfer oil heater? The main danger of thermal oil heaters is fire. Once the heat-conducting oil electric heater leaks from the heat-conducting oil furnace heating system, it will ignite or spontaneously ignite due to its high temperature and contact with or close to the flame, causing a fire. In addition, the thermal oil furnace will
    Release time: 2019-12-28 Clicks: 16

  • Factors affecting air heater

    Influencing factors of air heaters 1. Increasing the gas inlet flow rate of air heaters can enhance the convective heat transfer of air electric heaters and reduce the surface temperature of electric heating elements in air heaters. Service life, and reduce the heat loss of electric air heaters, so the efficiency of the air heat exchanger is improved, but if the speed is too high
    Release time: 2019-12-21 Clicks: 22

  • Safety operation regulations for small thermal oil boilers

    1. The operator should be familiar with the structure and principle of the furnace and the basic requirements of production heat equipment, and continuously summarize experience in practice, control the thickness of the coal seam, achieve full combustion, reduce smoke from the chimney, and ensure that the equipment is operating safely and efficiently status. 2. The new oil or the furnace restarted for a long time should be heated in stages according to the dehydration requirements of the thermal oil. 3. The outlet oil temperature should be set at 28
    Release time: 2019-12-14 Clicks: 17

  • Heater introduction

    Meltblown processes require a lot of hot air. The compressed air output by the air compressor is sent to the air heater for heating after being dehumidified and filtered, and then sent to the meltblown die head assembly. The air heater is a pressure vessel. At the same time, it must resist the oxidation of high temperature air, so the material must be stainless steel. The heating element of the air heater is a stainless steel electric heating tube. Multiple heater cavity
    Release time: 2019-12-07 Clicks: 16

  • Air heater maintenance failure repair

    Air heater maintenance failure repair and maintenance The control part of the air heater is a precision instrument. Be careful when transporting it. It is strictly prohibited to impact or hit. The cylinder part should be hoisted reasonably to avoid deformation and damage to the internal heating elements. The air heater and control cabinet are placed in the warehouse. Fault Maintenance Fault 1: The digital display meter does not work. Check if the air switch is closed and the control circuit is
    Release time: 2019-11-30 Clicks: 15

  • What are the characteristics of air duct electric heater

    There may be many people using the duct electric heater, but there are also many people who do not know what the characteristics of the duct electric heater itself are. Now let ’s learn together Features it. The air pipe electric heater is mounted on a fixed bracket by a stainless steel electric heating pipe with fins. The air pipe electric heater can be embedded in the air duct or static pressure box, and connected
    Release time: 2019-11-23 Clicks: 18

  • Safety precautions for heat transfer oil heaters

    The main danger of thermal oil heaters is fire. Once the heat-conducting oil electric heater leaks from the heat-conducting oil furnace heating system, it will ignite or spontaneously ignite due to its high temperature and contact with or close to the flame, causing a fire. In addition, the heat conduction oil furnace will also explode due to the heat conduction oil with water and other reasons. To prevent the accident of thermal oil heater
    Release time: 2019-11-16 Clicks: 17

  • Vacuum cleaning furnace use steps

    Vacuum cleaning furnace use steps The vacuum cleaning furnace is a mechanical device that effectively cleans the filter element of a chemical fiber component through a certain process. Here we introduce the steps of using the vacuum cleaning furnace. 1. Please check whether the voltage, water pressure and air pressure are normal before use. The low or high voltage of the electrical cabinet will affect the service life of the appliance; the buzzer will sound if the water pressure is low
    Release time: 2019-11-09 Clicks: 37

  • Introduction of explosion-proof electric heater

    Working principle The fluid explosion-proof electric heater is a type that consumes electrical energy and converts it into heat to heat the material to be heated. During work, the low-temperature fluid medium enters its input port under pressure through the pipeline, and along the specific heat exchange flow path inside the electric heating container, the path designed by the principle of fluid thermodynamics is used to take away the high-temperature thermal energy generated during the operation of the electric heating element. Make heated medium
    Release time: 2019-11-02 Clicks: 16

  • Air heater use precautions

    Many end-users use the ventilation mode to cool the host when it is turned off. "This is wrong." There is a process for normal shutdown: 1. When shutting down, the ignition plug will work again, completely burning the remaining diesel in the combustion chamber for reuse. When the heater is on, it can ignite smoothly. 2. When the remaining diesel is completely burned, the ignition plug will stop working and the fan will start working at the same time.
    Release time: 2019-10-25 Clicks: 18

  • Regular maintenance and maintenance method of heat transfer oil heater

    Regular maintenance and maintenance methods of heat-conducting oil heater 1. Water will corrode the heat-conducting oil pump, so it is forbidden to use the oil pump to evacuate the water-containing substances, and use the water pump to evacuate. 2. For substances containing a large amount of solvents, please remove most of the solvents in the oven first, and then use a heat transfer oil pump to evacuate. 3. Use the vacuum pump in the correct order to prevent back suction. 4, finished
    Release time: 2019-10-19 Clicks: 15

  • Liquid heater faq

    During the use of liquid heaters, we will encounter some problems that prevent the equipment from working properly. For this reason, Xindu Electric has sorted out the five common causes and treatment methods of liquid heaters, hoping to help you! 1. Poor circulation of the pipeline Solution: Turn on the air release switch of the heater and the pipeline to release the gas in the pipeline. Generally, the problem of poor circulation of the pipeline can be solved
    Release time: 2019-10-08 Clicks: 21

  • Performance and workflow of liquid heaters

    A liquid heater is a device mainly used to heat liquids. It converts electrical energy into heat and heats materials. Maybe in daily life, it is used in some electrical equipment, so many people don't know much about its performance and working process, but in fact, whether it is to purchase or use, these two points must be understood clearly Yes, so next
    Release time: 2019-09-30 Clicks: 20

  • Energy saving and energy saving of air duct type electric heater

    With the development of the electric power industry and the introduction of new technologies, the original hydraulic ash removal was changed to dry ash removal in thermal power plants, which not only saved a lot of water resources, grain fields, but also contributed coal ash to humanity. Electric duct heaters can use coal ash to make cement, coal ash bricks, and build highways, while also improving environmental pollution and benefiting the people. Air duct type electric heater is specially designed for coal-fired power plants.
    Release time: 2019-09-21 Clicks: 6

  • Analysis of the characteristics of heat-conducting oil electric heaters and what are the requirements for their use?

    Heat-conducting oil electric heater is made of combustible objects such as heavy oil, light oil, combustible gas, coal, etc., and the heat-conducting oil is an organic carrier. A circulating oil pump is used to force the liquid phase circulation of the heat-conducting oil to transfer heat to the heating equipment and return to the large boiler for heating. Heat transfer oil, which is often called heat medium oil, is used as an intermediate heat transfer medium in the boiler industry for 50 to 60 years.
    Release time: 2019-09-12 Clicks: 26

  • Features of organic heat carrier furnace

    Introduction of the characteristics of the organic heat carrier furnace The organic heat carrier furnace refers to a new type of thermal energy conversion equipment whose heat carrier fluid is high-temperature heat-conducting oil (also called thermal coal body, heat carrier). Usually, the capacity of the furnace is also expressed in “MW” (megawatt), and the old unit is also expressed in “10,000 kilowatts / hour” or “10,000 kcal / hour”, that is, “104kcal / h”. Organic heat carrier furnace (also known as thermal oil furnace)
    Release time: 2019-09-01 Clicks: 18

  • Outstanding advantages of air heaters

    Air heaters have gradually been widely used and have gained the trust of customers. Previously, we shared what problems to pay attention to when selecting air heaters. The main reason why air heaters can be widely used is also related to its performance. Closely related, today we will take a closer look at the outstanding advantages of air heaters: 1. The air heater system is at
    Release time: 2019-08-24 Clicks: 20

  • Standard inspection items when purchasing a thermal oil heater

    As an important large-scale heating equipment, heat-conducting oil heaters must be taken seriously when purchasing. So when the company chooses a heat transfer oil heater, what specific indicators are used to measure the quality of the heat transfer oil heater? What checks are we going to make? It is divided into three aspects: inspection before start, start, and shutdown operation. I. Inspection before startup
    Release time: 2019-08-17 Clicks: 22

Total 128 20 Articles per page Pages: 1/7
2 3 4 5 6 7 下一页 尾页 1 2 3 4 5 6 7 Next Last
online service
share it
必赢真人娱乐 天天电玩城 真人游戏平台注册 七乐彩